
Blog
How I made a miniature Berger guillotine at 1/15 scale
Two years of work, from 2016 to 2018: a functional 1/15 scale Berger guillotine with a steel release mechanism, hand-modelled figures and a scaffold built with more than 750 nails.
This project took me two years of intermittent work, from 2016 to 2018. The scene is based on the execution of a criminal by Anatole Deibler using a Berger guillotine. If you are interested in this famous executioner, read the history of the Berger guillotine; if not, just enjoy this humble tribute to a magnificent machine.
My aim was to combine a functional Berger guillotine with a completely handmade scene at 1/15 scale. The main difficulty was reproducing some parts of the guillotine faithfully at such a small scale, above all the mechanism inside the capital, made entirely of steel. At 1/15 scale the guillotine stands 270 mm (10.6 in) tall.
The parts of the guillotine
The guillotine starts with a base made of two runners and a crossbar. Two risers stand on this base, and the mouton with the blade slides along them.
The prisoner lies on an articulated seesaw, with the neck held in a lunette made of two halves. After the execution, the head falls into a metal recipient and the body into a wicker basket.
There is also a screen, or paravent, that stops the blood from splashing the executioner when the blade falls. I decided not to include it because it would hide the head and its recipient.
Finally, at the top of the guillotine is the capital, with a pulley for the rope and the mechanism that releases the mouton.
The capital and its mechanism
I started with the capital and the release mechanism inside it, probably the hardest part of all. The whole mechanism is made of steel. The capital door is made of brass with a handmade hinge, and a pulley wheel completes it.
Risers, springs and trigger
The risers are made of layers joined with through screws. The grooves the mouton slides along are covered with brass, fixed to the wood with tiny bolts. At the bottom, springs I made with steel wire and a drill cushion the mouton. A trigger system releases the mechanism of the capital.
Base, legs and assembly
The T-shaped reinforcing legs are joined to the base with assembly screws. Instead of screwing them straight into the wood, I installed threaded bushings so the screws would not work loose. Threaded rods with nuts fix each riser to the capital.
Lunette, seesaw and ramp
The lunette is made of two halves, one side covered with metal. A T-piece joins the seesaw to the lower half, and the table moves along a groove on a hinge. A side ramp throws the body into the basket after the beheading.
The mouton and its steel blade
I made the mouton entirely of metal: a central frame that houses the rollers, with a thick metal plate screwed to one side and the blade fixed with three through screws. At the top is the spike that locks into the claw, and the hook for the rope.
Basket and recipient for the head
The basket for the body was usually made of wicker, but that material was impossible at this scale, so I used hemp thread. The inside is lined with metal and each corner is joined with tiny brackets. The bucket for the head was usually made of zinc; I made mine of brass.
Hand-modelled figures
To make the diorama even more exclusive I modelled three figures specifically for this scene. The executioner is Anatole Deibler in his later years. As France's chief executioner he took part in the execution of 395 criminals during a 54-year career, and was responsible for 299 beheadings in his 40 years as chief. The scene is completed by the criminal, and by a dog and two rats fighting over a piece of meat.
The scaffold and the base
The Berger guillotine did not need the level surface of a scaffold, but I wanted to include one to make the scene more spectacular. It took more than 750 nails. The ground and the base complete the diorama.
Today the miniature Berger guillotine is the most detailed piece in my collection. You can compare it with the other versions on the miniature guillotines page or ask me about it.


















